You are here: Kefid Machinery > FAQ > Cone Crusher > How to choose a cone crusher?

Cone crusher uses a new concept of fragmentation, developed a new type crusher, a structural principle of this device is different from the jaw crusher, hammer mill, rotary grinders and other crushers. Its unique performance and its unique ability to split much different from other grinders.

Cone Crusher shared by Symons (spring cone crusher) and high-performance hydraulic cone crusher, widely used for crushing of medium above a variety of ores and rocks.
 
Cone crushers shares on the standard type and korotkogolovy type usually used for secondary crushing and fine crushing.Standard type, how to, for secondary crushing.Korotkogolovy type used for fine crushing. CS cone crusher have four types of cavities, particularly as crude, coarse, medium, fine.

How to choose a cone crusher, we offer you my sincere advice.

The principle of choice Crusher defines the input and output size of the particle size of the finished product. If the input size is large, then choose Cone Crusher is especially rough or coarse, and vice versa to choose medium or thin.

CS Cone Crusher  standard type used for open loop, CS Cone Crusher  korotkogolovogo type is used for closed loop. When choosing a lining, the user typically must consider three factors: performance, power consumption, wear pads, the framework should be as follows: the maximum size of the input, changing the particle size, particle size distribution power, hardness, wear resistance of the material. The higher power consumption as long lining, choose a short pad for hard materials, choose a long pad for soft materials, the distribution of the material, fine material is selected a short pad, fat pad material is selected long. The distribution of the input particle size is generally smaller than the closed side of the exit window can not exceed 10% of the material, if more than 10%, power consumption increases, the size of the product becomes slantsevidnym. Increase in viscous materials in quantities of moisture can affect the permeability of the material, usually no more than 5%. When using power: the standard cone crusher should reach 75% to 80%, korotkogolovoy cone crusher should reach 80% to 85%. Cone crusher because of poor environmental management, a lot of dust, combined with some use of the system for maintenance is in place, often came into operation the various issues in general, cone crusher in the use and exploitation should be aware of the following, in order to ensure normal operation of the machine. Cone Crusher at work, feeding the material should be uniform, not segregation. If feeding material is not uniform, the performance will be reduced, the particle size of the product is too large, the spring moves frequently, and large bowl-shaped bearing pressure, power consumption is increased. If there is obezzhelezivayuschy filter to prevent the iron enter into the crushing chamber, if the removal of iron too, it can lead to an accident break the shaft.
Cone crushers in the purchase is necessary to pay attention to these problems, such as to buy equipment to put a lot of money, so the company Zenith is a professional manufacturer and supplier of Konun droblok, we guarantee to supply you with high quality crusher, crushing the most sensible solution to meet your product requirements .